$10.15
RC-200 is a special formulation that’s applied without the need to scrub, eliminating existing iron stains without harming painted surfaces. RC-200 is very economical, easy to handle and apply.
We strongly recommend a test on an inconspicuous area BEFORE completing the full application. (allow test spot to dry before proceeding). RC-200 can be diluted. We suggest starting with a one-to-one ratio with water.
Apply on:
Painted concrete surfaces:
Apply with either a brush, roller or sprayer. Rust should dissipate seconds after applying. Rinse the area immediately with water. Reapply when dry, if necessary.
Sidewalks and concrete driveway:
For most effective results, mix 2 parts chemical to 1 part water in a bucket. Apply with a brush evenly and allow to dry completely (before rising thoroughly).
Stone or brick finishes:
On jagged unpainted surfaces, apply full strength, allow to soak for 1 to 2 minutes, rinse thoroughly.
Fiberglass boats:
To apply use a rag or sponge. Test before completing. Rinse thoroughly.
