Skip to content
  • PT1 Conductivity/TDS/ Salinity/Temp. Pen

Myron L Ultrapen PT1 – Handheld Conductivity, TDS, Salinity & Temperature Tester with Automatic Temperature Compensation

Original price was: $231.00.Current price is: $208.00.

  • Model: PT1
  • Type: Pocket Water Quality Tester
  • Parameters Measured:
    • Conductivity: 1–10,000 µS
    • TDS (Total Dissolved Solids): 1–10,000 ppm
    • Salinity: 0.0010–10.000 ppt
    • Temperature: 0–71°C (32–160°F)
  • Accuracy: ±1% of reading
    Repeatability: <1000 µS/ppm ±1 count; ≥1000 µS/ppm ±0.3% of reading
    Resolution:
    • Conductivity/TDS: 0.1 for 1.0–99.9 µS/ppm; 1 for 100–10,000 µS/ppm
    • Salinity: 0.0001 for 0.0010–0.0999 ppt; 0.001 for 0.100–10.000 ppt
    • Temperature: 0.1°C/°F
  • Temperature Compensation: Automatic to 25°C
    • Conductivity: KCl
    • TDS: 442™ Natural Water Standard, NaClMeasurement Modes:
    • Salinity: 442™, NaCl
  • Display: Digital LCD with temperature display
  • Power Supply: One N-type 1.5V alkaline battery (included)
  • Battery Life: Approximately 100 hours of continuous use
  • Dimensions: 6.75″ L x 0.625″ D (17.15 cm x 1.59 cm)
  • Weight: 1.94 oz (55 g)
  • Enclosure Rating: IP67/NEMA 6 (waterproof to 1 meter)

This portable water analysis instrument is designed to be extremely accurate, fast and simple to use in diverse water quality applications. Advanced features include the ability to select from 3 different solution types that model the characteristics of the most commonly encountered types of water; proprietary temperature compensation and TDS conversion...

MODE PARAMETER SOLUTION MODEL UNITS
Cond KCl Conductivity potassium chloride microsiemens (µS)
tdS 442 Total Dissolved Solids (TDS) 442™ Myron L Natural Water Standard parts per million (ppm)
tdS NaCl Total Dissolved Solids (TDS) sodium chloride parts per million (ppm)
SALt 442 Salinity 442™ Myron L Natural Water Standard parts per thousand (ppt)
SALt NaCl Salinity sodium chloride parts per thousand (ppt)

ULTRAPEN™ PT1 Specifications

Measurement Range: 1 – 10000 µS or ppm (0.0010 – 10.000 ppt salinity)
Accuracy (After Wet Calibration): ± 1% of reading
Repeatability: < 1000 µS or ppm ± 1 Count ≥ 1000 µS or ppm ± 0.3% of reading
Resolution: Conductivity and TDS: 0.1 for 1.0 – 99.9 µS or ppm 1 for 100 – 10000 µS or ppm
Salinity: 0.0001 for 0.0010 – 0.0999 ppt 0.001 for 0.100 – 10.000 ppt
Temperature: 0.1ºC / 0.1ºF
Time to Reading Stabilization: 10 – 20 seconds
Power Consumption: Active Mode: 30 – 140 mA, Sleep Mode: 2 µA
Sleep Mode Power Consumption: 2 µA
Temperature Measurement Range: 0 – 71°C or 32 – 160°F
Temperature Accuracy: ± 0.1ºC
Temperature Compensation: Automatic to 25ºC
Physical Dimensions: 17.15 cm L x 1.59 cm D or 6.75 in. L x .625 in. D
Weight: 55 g or 1.94 oz.
Case Material: Anodized Aircraft Aluminum with Protective Coating
Battery Type: One N type, Alkaline, 1.5V
Calibration Solution Point: 1800 µS KCl; 3000 ppm 442™ (2027 ppm NaCl)
Operating/Storage Temperature: 0 – 55ºC or 32 – 131ºF
Water Resistance: IP67 and NEMA 6
E Minimum height 5 mm EN61236-1: 2006 – Annex A: 2008 Electrostatic discharge to the PT1 may cause it to spontaneously turn on. If this occurs, the PT1 will turn off.
WARNING! These products can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Products Related to this Item