– Pleated design maximizes surface area
– FDA-approved materials – NSF 61 Certified – Engineered media for high performance.
– Cleanable and reusable for most applications and micron sizes.
– Thermally bonded end caps for improved sealing.
– End caps are color-coded for simple micron identification.
– Full product line – widest range of micron ratings
– High temperature cartridges are available (not NSF 61 listed).
– Lower overall operating cost
– High flow capability
– Longer filter runs for fewer change-outs
– Increased contaminant removal
– Lower intial pressure drops
– Reduced maintenance down time and cost
– NSF Certified to ANSI-NSF 61
Applications
– Reverse Osmosis Pre-Filtration – Cooling Tower Filtration
– Municipal Drinking Water Filtration – Chill Water Loop Filtration
– Commercial/Residential Drinking Water Filtration – Food & Beverage Filtration
– Desalination Pre-Filtration – Marine/Aquatic Filtration
– Industrial Water Filtration – Industrial Coolant Filtration
Specifications
Harmsco HIF filter housings use 9-3/4″, 19-1/2″ and 29-1/4″ length cartridges only.
| Micron Rating | 5 Microns |
| Media (sq ft) | 6 |
| Rec. Flow Rate (GPM) |
6 |
| Flow Rate |
4-6 GPM per 9-3/4″ length |
| Filter Dimension | 2-3/4″ OD x 9-3/4″ H (1-1/16″ ID) |
| pH |
3-11 |
| Filter Dimension | 2-3/4″ OD x 9-3/4″ H |
| Filter Media | Polyester-Plus™ |
| End Caps |
Plastisol (pliable PVC), except urethane on HT Series |
| Center Tubes |
Molded ABS or rigid PVC |
| Temperature |
140°F (Standard), 200°F (High temp. cartridges)** |
* Harmsco Recommends operation at 70% of maximum flow rate for optimum performance
** Temperature limits vary and depend on pressure and time under load
