LB03SA-VVC9-XXX PULSAtron Series A Plus Metering Pump, 12 GPD – 150 PSI – 115 VAC
Original price was: $888.00.$507.01Current price is: $507.01.
Typically ships in 5 to 7 business days
PULSAtron Series A Plus Metering Pump, Degassing Head.
12 GPDÂ 150 PSI, 115 VAC
Dual Manual Control
Stroke frequency and stroke length are manually adjustable. 100:1 max turndown.
Overview
The Pulsafeeder PULSAtron Series A Plus chemical metering pumps use a positive displacement diaphragm design. While the pumps are in operation, the output volume can be adjusted from zero to maximum capacity. PULSAtron Series A Plus guided check valves, with their cutting-edge seat and ball designs, offer precise seating as well as exceptional priming and suction life. The out timing circuit is extremely reliable and, by design, is nearly immune to temperature, EMI, and other electrical disturbances. Series A Plus pumps continue to meet pressure and capacity criteria even after extended use. This is due to our high-quality solenoid and unique enclosure, which effectively dissipate heat. Agency Approved and water-resistant for tough outdoor and indoor applications.
The Drive Assembly
The pump drive is totally enclosed with no exposed moving parts. Electronics are housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Average electrical power consumption is 50 Watts.
Pump Controls
Adjustment is by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are located opposite the liquid handling end.
Materials of Construction
See Specifications tab. Chemical metering pump housing shall be of chemically resistant PBT thermoplastic. All exposed fasteners are stainless steel. Valve seat and seal ring are renewable by replacing the cartridge valve assembly.
Pulsafeeder PULSAtron Series A Plus Chemical Metering Pump – Key Features
- Manual Control by on-line adjustable stroke rate and stroke length.
- Highly Reliable timing circuit.
- Circuit Protection against voltage and current upsets.
- Solenoid Protection by thermal overload with auto-reset.
- Water Resistant, for outdoor and indoor applications.
- Internally Dampened To Reduce Noise.
- Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics.
- Few Moving Parts and Wall Mountable.
- Safe & Easy Priming with durable leak-free bleed valve assembly (standard).
- Reliable metering performance.
- Rated “hot” for continuous duty.
- Leak-free, sealless, liquid end.
| Product Type: | Diaphragm Metering Pump, Solenoid Driven |
| Brand: | Pulsafeeder |
| Product Line: | PULSAtron Series A Plus |
| Max Flow (GPH): | 0.50 |
| Max Flow (GPD): | 12 |
| Max Pressure (PSI): | 150 |
| Max Viscosity (CPS): | 1,000 |
| Max Strokes per Minute: | 125 |
| Flow Control: | Dual Manual Control |
| Turn Down Ratio: | 100:1 |
| Head/Fittings: | PVC, Degassing Head. |
| Valve Balls: | Ceramic |
| Diaphragm: | PTFE faced CSPE |
| Valve / Seat / O-Ring: | Viton |
| Connections: | Tubing 3/8″ O.D. |
| Power Supply: | 115 VAC 50/60 Hz, US Plug |
| Operating Modes: | Manual |
| Net Weight: | 10 lbs |
| Includes: | A weighted foot valve/strainer assembly, a 1/2″ NPT male injection fitting/back pressure check valve assembly, 4′ suction tubing, 4′ bleed/return tubing, 8′ discharge tubing and Owners Manual. |
| Notes: | Degassing Head, No Bleed Valve with this model. |
Related Product
LB04SA-VHC1-XXX PULSAtron Series
LB02SA-KTC1-XXX PULSAtron Series