$1,431.00 Original price was: $1,431.00.$858.57Current price is: $858.57.
PULSAtron Series E Plus Metering Pump
24 GPD 100 PSI, 115 VAC
4-20 mA Input with Dual Manual Control and Stop Function Input
Stroke frequency control via 4-20 mA signal input, manual stroke length control. Stroke frequency is manually adjustable when in local control. Includes stop function input.
Overview
The Pulsafeeder PULSAtron Series E Plus chemical metering pumps are diaphragm-type pumps with positive displacement. While the pumps are operating, the output volume can be adjusted from zero to maximum capacity. The PULSAtron Series E Plus includes a highly dependable timing circuit as well as circuit protection against voltage and current spikes. This pump has thermal overload protection for the solenoid with auto-reset. The Series E Plus guided check valves, with their cutting-edge seat and ball designs, enable precise seating as well as superb priming and suction lift performance. Our timing circuit is extremely dependable and, by design, is unaffected by temperature, EMI, and other electrical interferences.
Drive Assembly
The pump drive is totally enclosed with no exposed moving parts. Electronics are housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Average electrical power consumption is 130 Watts.
Pump Controls
Adjustment is by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are located opposite the liquid handling end. Automatic control via 4-20mA DC and stop function inputs. Auto-Off-Manual switch.
Materials of Construction
See Specifications tab. Chemical metering pump housing shall be of chemically resistant PBT thermoplastic. All exposed fasteners are stainless steel. Valve seat and seal ring are renewable by replacing the cartridge valve assembly.
Pulsafeeder PULSAtron Series E Plus Chemical Metering Pump – Key Features
Product Type: | Diaphragm Metering Pump, Solenoid Driven |
Brand: | Pulsafeeder |
Product Line: | PULSAtron Series E PLUS |
Max Flow (GPH): | 1.00 |
Max Flow (GPD): | 24 |
Max Pressure (PSI): | 100 |
Max Viscosity (CPS): | 1,000 |
Max Strokes per Minute: | 125 |
Flow Control: | 4-20 mA Input with Dual Manual Control and Stop Function Input |
Turn Down Ratio: | 100:1 |
Head/Fittings: | PVC |
Valve Balls: | Ceramic |
Diaphragm: | PTFE faced CSPE |
Valve / Seat / O-Ring: | TFE |
Connections: | Tubing 3/8″ O.D. |
Power Supply: | 115 VAC 50/60 Hz, US Plug |
Operating Modes: | 4-20 mA / Off / Manual |
Net Weight: | 13 lbs |
Includes: | A weighted foot valve/strainer assembly, a bleed valve assembly, a 1/2″ NPT male injection fitting/back pressure check valve assembly, 4′ suction tubing, 4′ bleed/return tubing, 8′ discharge tubing and Owners Manual. |