R12-1200-2 Reverse Osmosis System
$4,149.60
Typically ships in 7 to 10 business days
Standard Features in Package 1: Stainless steel frame Automatic inlet valve Pre-filter housing and cartridge, 10″ Procon pump (brass) 1/2 HP motor 2 1/2″ liquid filled pump pressure gauge Stainless steel pressure vessel(s) Needle valve for concentrate and recycle lines SS check valve for product water Product pressure switch with Auto/Off Low-pressure shut-off with automatic restart Additional
Features in Package 2: Pre-filter pressure gauges Product water flow meter Reject water flow meter
Additional Features in Package 3: Automatic fast flush for concentrate Compact, wall mounted systems. Four models for flow rates to 1200 GPD.
Options: Stainless steel leg kit Product water float switch Whole house option* *Includes 300 gal tank, product water float switch, and repressurization pump with built in controls. Notes: Maximum production are based on 77F feed water, SDI < 3, 1000 ppm TDS, and pH of 8. Please see water temperature conversion charts to determine actual production rate for each installation. Chlorine reduction and other pre-treatment may be required. Membrane rejection rates arebased on membrane manufacturer’s specifications. Pre-filter is Flow-Pro FPMB5-978 melt blown cartridge. Systems are designed for use with municipal and well water.
| Model | R12-1200-2 |
| Condition | New |
| Typical rejection | 0.98 |
| Membrane size | 2-1/2″x40″ |
| Recovery (adjustable) | 25 – 75 % |
| Dimensions | 22″x52″x12″ |
| Feed water connection | 1/2″ NPT |
| No. of membranes | 2.0 |
| Gpd | 1200.0 |
| Package | 2.0 |
| Wt. (lbs.) | 70.0 |
| Pump | 1/2 HP |
| Amps | 8 |
| Electrical requirement | 120 v / 60 Hz |
| Drain requirement (maximum) | 2.4 GPM |
| Feed water pressure requirement (minimum) | 10 PSI |
| Feed water requirement (maximum) | 2.4 GPM |
| Product water & reject water connection (tubing) | 3/8″ |
